Fire alarm training | Jolie Group Engineering


August 12, 2017 Facebook Twitter LinkedIn Google+ Bloggership,HotOnBlog


Product Name: Fire alarm training | Jolie Group Engineering

Click here to get Fire alarm training | Jolie Group Engineering at discounted price while it’s still available…

All orders are protected by SSL encryption – the highest industry standard for online security from trusted vendors.

Fire alarm training | Jolie Group Engineering is backed with a 60 Day No Questions Asked Money Back Guarantee. If within the first 60 days of receipt you are not satisfied with Wake Up Lean™, you can request a refund by sending an email to the address given inside the product and we will immediately refund your entire purchase price, with no questions asked.

Description:

When we speak about Fire alarm testing or Fire alarm maintenance we should ask:

What are the steps and procedures to test your fire alarm system? Do you know what fire alarm parts are you going to test and/or maintain?

Do you know how to test a fire alarm heat detector, how to maintain smoke detectors or even how to reset fire alarm system after testing?

So what is the difference between testing and maintenance fire alarm system?

Testing is doing some scheduled practices and pre-defined procedures to ensure system liability and by those testing schedules you will save money and protect your property.

Any fire alarm circuit consists of:

You have to test your system every specified period of time to confirm the liability of your system.

Testing is done using special tools,some for smoke detection and others for heat detection.

For instance if you are going to check your home fire alarm system & hire someone specialized in fire alarm testing, you don’t have to bring him monthly & pay him money;

You can bring him and make the maintenance semi annually (every 6 months).

On the another hand if you have a valuable piece of antique in an important museum you will have to test the system monthly and pay for it.

If your system is older than 7 years you will be obligated to test and maintain your fire alarm system with close attention.

Testing fire alarm system is a fire safety matter that you should implement.

Fire alarm maintenance is to disassemble fire alarm parts and maintain, clean and inspect them separately.

Maintenance basic procedures:

There is a base for testing even you have to make a sheet for testing the fire alarm system (Enroll in the course to find what this test sheet looks like?)

You should periodically maintain and test your fire alarm system which including checks for:

Also resetting fire alarm is required during testing the fire alarm system as some of fire alarm parts testing are simple and others are complicated.

Testing and maintenance of heat detectors ,smoke detectors and flame detectors are done using special tools and certain steps for efficient fire alarm testing.

If you want to get a fire alarm training about fire alarm testing and maintenance here is your guide:

FIRE ALARM DESIGN GUIDE e-Book

Wireless fire alarm system is a another shape of the original standard fire alarm system.

Wireless fire alarms are a good use of wireless radio frequency technology as they are used in certain applications:

Note that most of valuable or historical palaces that use wireless fire alarm systems also use wireless security cameras (video surveillance system), applications of radio frequency wave propagation.

Typical wireless security system uses wireless alarm system and wireless CCTV video recording system.

In some countries you must take permission or pay some annual fees for using some wireless frequency ranges.

As we all know that anything in the world has advantages and disadvantages.

The advantages of the wireless fire alarms are:

The disadvantages of the wireless fire alarms are:

                      Original fire signal

                    Distorted fire signal

The significant disadvantage of wireless fire alarm system is the wave distortion which will make actual fire signal do not reach the fire alarm control panel or it will reach the panel with distortion that will not be identified as an alarm signal.

Here is a typical fire alarm signal sine wave and the distorted alarm wave after noise interference.

If your application has no limitations and accepts both systems (wireless fire alarms & conventional cabled fire alarm system) you should make a cost study which system is cheaper to implement as both systems provide you the same function.

In the wireless fire alarm system all system parts are connected to the main fire alarm control panel individually not a loop connection,

Wireless fire alarms usually use the frequency around 800 MHz which you have to check with your local authorities about the availability of using this frequency range.

All of the fire alarm system parts are addressable points; each point is configured individually and programmed to the extreme detail you need.

If you need more information in how to design a wireless fire alarm system and want to know the analysis of the fire alarm wave propagation & fire alarm antenna types, Purchase this fire alarm training course:

FIRE ALARM DESIGN GUIDE e-Book

(adsbygoogle=window.adsbygoogle||[]).push({});

Copyright © 2017 Ebook.All Rights Reserved

The changes you made will be lost if you navigate away from this page.

Click here to get Fire alarm training | Jolie Group Engineering at discounted price while it’s still available…

All orders are protected by SSL encryption – the highest industry standard for online security from trusted vendors.

Fire alarm training | Jolie Group Engineering is backed with a 60 Day No Questions Asked Money Back Guarantee. If within the first 60 days of receipt you are not satisfied with Wake Up Lean™, you can request a refund by sending an email to the address given inside the product and we will immediately refund your entire purchase price, with no questions asked.

Comments